|
|
DREAM CATCHER *Sold
This Admiral 38 Executive Version has just been launched in Cape Town, South Africa. It has everything except AC and Generator. It is expected to be delivered to the US in November/December 2005.
 Full Specifications |
| Boat Name: |
Dream Catcher |
| Manufacturer: |
Admiral Yachts |
| Designer: |
Angelo Lavranos |
| Model: |
Admiral Executive 38 |
| Year: |
2005 |
| Price US$: |
SOLD |
| Location: |
Cape Town, South Africa |
| Length: |
38' |
| Beam: |
23' |
| Draft: |
2' 06" |
| Displacement: |
15,432 lbs |
| Mast Height Out of Water: |
57' 07" |
| Mast Height Off Deck: |
50' 07" |
| Engine/s: |
2 x 29 HP Yanmar Diesels |
| Fuel Tank Capacity: |
137 gal |
| Water Tank Capacity: |
137 gal |
| Cabins: |
3 |
| Heads: |
2 |
| Mainsail Area: |
635 s.f. |
| Genoa Area: |
355 s.f. |
| Spinnaker Area: |
377 s.f. |
| Tender: |
NA
|
|
| Anchoring |
2 x Single bow rollers
Electric Windlass
1 x 45 lb CQR anchor
60m x 10mm galvanized chain
Customized bridal system
Secondary fortress anchor
10m x 10mm galvanized chain
45m x 16mm anchor rope
|
| Deck Hardware |
Harken main sheet system
Traveler control fitted on targa wing and accessible from cockpit
Main sheet ends at winch in front of double helm station
Harken adjustable Genoa cars with stoppers
Spinlock or other jammers
Harken winches – 3 x 40 self-tailers
All blocks are Harken
Main sheet and genoa can be easily trimmed from cockpit
|
| Electrics |
1 x 65 amp starter battery per engine
6 x Deep cycle batteries totaling 630 amps for house supply
1 x battery switch per engine
1 x custom switch panel
1 x 12 volt outlet at switch panel
1 x 12 volt outlet at helm station
1 x AC outlet on switch panel 110 volt
1 x AC outlet in saloon 110 volt
1 x AC outlet in galley 110 volt
1 x AC outlet in each cabin 110 volt
AC panel
1 x High voltage alternator Balmar 80 amp per motor plus batt monitoring system
1 x Galley fan
1 x Saloon fan
1 x Fan in each cabin
2 x 100 watt solar panels
|
| Electronics |
Raymarine wind, speed, depth and ST 6000 autopilot
Raymarine GPS, Chartplotter, Radar (Pathfinder)
Icom VHF 402 with masthead aerial & commander microphone at helm station
1 Inverter Charger 200 kva with all attachments for connecting to shore power
Shuttle CD player with two speakers in saloon and 2 waterproof speakers mounted in targa wing
HF Icom 802 with distress dyna plate and wire antenna
|
| Engines |
Yanmar 2 x 29hp engines with filters (optional upgrade to folding props)
Wet muffler type exhausts with waterlocks
2 x Morse controls with engine control panels mounted in front of a double helmsman’s seat
2 x 2 Blade folding props 17” x 14”
4 x Exhaust outlets
|
| Hull (constructed to designer specification utilizing) |
Resin approved by Lloyds, SABS and ISO9002
Gelcoat approved with Lloyds, SABS and ISO9002
A tissue layer is applied to the gelcoat throughout the entire boat to prevent osmosis
Lloyds approved 19mm Balsa Core used in sandwich construction vacuum bagged onto the glass layer
Chop strand mat 300g per square meter and stitched mat 640g per square meter approved by Lloyds SABS and ISO 9002
5 coats of International water proofing epoxy is applied over gelcoat below the waterline to add to the prevention of osmosis
International Antifowl is applied over this barrier
Deck specifications are the same as the hulls and bridgedeck
All reinforcing
|
| Interior |
Headliners in saloon and all the cabins
1 x Queen size cabin with locker, hanging space and seating area
1 x King size cabin with lockers, hanging space and seating area
1 x ¾ size cabin with locker and hanging space fwd starboard
1 x Std head with locker and bathroom fittings port
1 x Custom head with locker and bathroom fittings starboard.
Built in cupboard in starboard hull.
Saloon wrap around seating for eight with upholstered cushion and storage below
Saloon table in beach
Galley extended 200mm to port to accommodate additional storage space Smev 3 plate gas hob with under counter oven
70 lt Logicold top loading freezer 12v & 110v
115 lt front loading fridge
Double sink with single swivel head tap with hot & cold water
Teak / Holly wooden flooring in saloon & hulls
Stipple painted finish with solid wood trim, beech wood with lattice
Gas detection system
|
| Lighting |
1 x Down light in each cabin
2 x Reading down lights in each cabin
1 x Fluorescent light in each head
1 x LED Light in each head
1 x Fluorescent light in each engine room
2 x LED lights on each sugar scoop
1 x LED lights on each interior step
8 x Down lights in saloon
1 x Cockpit light in solid bimini
2 x Lights in targa wing
2 x Down reading lights in saloon
|
| Mast |
Standard Spar Craft anodized aluminium section with steaming, tricolour and deck light fitted with 2 Harken 30 ST winches and jammers.
Standard Spar Craft anodized aluminium Boom section with vang.
Harken furling system
Harken batt car system
Radar reflector
|
| Misc. Deck Fittings |
6 x Cleats
2 x Trampolines
3 x Lockable winch handles
3 x Winch handle pockets
1 x Compass
Water and fuel filler fittings
Solid bimini fitted between coachroof and targa wing
1 x 118 gallon fuel tank with necessary return lines, breathers, etc
1 x 118 gallon water tank with all necessary return lines breathers, etc
1 x 8 gallon watermaker holding tank
14 x Portlights with trims & flyscreens
4 x Hatches with trims & flyscreens
1 x Fully anodized lockable sliding door
7 x 10mm Acrodyte windows
1 x Cockpit table
6 x Louver steps
4 x Exterior lockers
Full set of outside cushions
Full set of window covers
Full set of hatch covers
Full set of winch covers
Cockpit front screen
Cockpit side covers
|
| Plumbing |
2 x electric toilets, large bowl
2 x 14 gallon black water tanks
Par pressure pump with accumulator tank
Mixers with shower outlets in both heads
Drain pumps with filters
9 gallon Hot water clarifier for hot water system
Cold water rinsing shower mounted in sugar scoop or on the swim platform Mixing tap in galley with hot & cold water
1 x Rule 500 bilge pump in each hull with built in float switch
1 x Rule 500 bilge pump in each engine compartment with built in float switch Deck wash pump
8 Gallon per hour Sea Recovery Watermaker
|
| Running Rigging |
12 mm Polyester braid main halyard
12 mm Polyester braid genoa halyard
12 mm Polyester braid main sheet
12 mm Polyester braid genoa sheets
12 mm Polyester braid spinnaker halyard
10 mm Polyester braid topping lift
10 mm Polyester braid roller furl line
12 mm Polyester braid outhaul
12 mm Polyester braid reefing lines x 2
10 mm Polyester braid traveler lines x 2
|
| Safety Equipment |
Horseshoe life ring with light and dan buoy
3 x Fire extinguishers 1,5 kg powder
1 x complete capsize bottle approved by Department of Transport including all flares etc.
1 x Emergency tiller
|
| Sails |
Quantum crosscut mainsail with battens
Quantum radial genoa with foam UV protection
Stack pack
Asymmetrical spinnaker with dowsing sock
|
| Steering |
Consists of a twin rudder system with stainless shafts connected by an adjustable stainless connection rod.
Delron bearings are used on the rudder shafts and the stainless steel arms are connected to the Whitlock steering system via stainless cable and a stainless chain.
The autopilot unit drives directly onto the connection rod.
|
| Stainless Steel |
2 x Stainless steel pulpits with seats
2 x Stainless steel pushpits
6 x Stainless steel stanchions
Double set of regulation size lifelines
Stanchion lines shackled to pulpits
Lifelines shackled to pulpits
Lifelines attached to pushpits with bottle screws
Handrails on coach roof
1 x fold up boarding ladder in sugar scoop
1 x Tender lift
2 x Chain plates
1 x Life ring holder
2 x Swim platform rails
2 x Grab rails inside saloon
1 x Grab rail at sliding door
1 x Helm fiddle
2 x Skylight grab rails
2 x Solar panel brackets
1 x Gas BBQ
|
|
